- General Support
- Oneline & User Interface
- License Key Issues
- Downloading/Installing Software
- Printing
- Reports
- Equipment Modeling
- DAPPER (Demand Load)
- DAPPER (Load Flow)
- DAPPER (Short Circuit)
- CAPTOR (TCC)
- Arc Flash Evaluation
- Equipment Evaluation
- Cable Ampacity
- A_Fault (ANSI)
- IEC 60909 Fault
- IEC 61363 Fault
- TMS (Transient Motor Starting)
- HI_WAVE (Harmonics)
- Unbalanced/Single Phase
- DC Systems Analysis
- GroundMat
- Cable-3D
- Scenario Manager
- Backup & Import/Export
How to retrieve deleted Datablock Formats
Scenario:
1) User accidentally delete "Bus Fault Currents {A_FAULT}

2) Click on Imports... (doesn't matter what you highlighted...in my case Bus Fault Currents comprehensive) then go to (C:) > PTW 32 > Bin > Draw.FMT

3) Click open and this window should show up (Import to One-Line Datablock Formats) > highlight "Branch Fault Currents (A_FAULT)" > ok

4) And that is it...it should come back up. As shown below.

1) User accidentally delete "Bus Fault Currents {A_FAULT}
2) Click on Imports... (doesn't matter what you highlighted...in my case Bus Fault Currents comprehensive) then go to (C:) > PTW 32 > Bin > Draw.FMT
3) Click open and this window should show up (Import to One-Line Datablock Formats) > highlight "Branch Fault Currents (A_FAULT)" > ok
4) And that is it...it should come back up. As shown below.