- General Support
- Oneline & User Interface
- License Key Issues
- Downloading/Installing Software
- Printing
- Reports
- Equipment Modeling
- DAPPER (Demand Load)
- DAPPER (Load Flow)
- DAPPER (Short Circuit)
- CAPTOR (TCC)
- Arc Flash Evaluation
- Equipment Evaluation
- Cable Ampacity
- A_Fault (ANSI)
- IEC 60909 Fault
- IEC 61363 Fault
- TMS (Transient Motor Starting)
- HI_WAVE (Harmonics)
- Unbalanced/Single Phase
- DC Systems Analysis
- GroundMat
- Cable-3D
- Scenario Manager
- Backup & Import/Export
Merging two projects
You can create a New Project and within the new project you can go to Project>Merge. Browse and select "Project A". Once "Project A" is merged go to Project>Merge and select "Project B".
In Details:
Let’s says there are two PTW32 projects, (Project_A and Project_B), that we want to merge together into another project (Project_C).
Create a new project name Project_C While in Project_C, click the Project>Merge.. command. The” Merge PTW” dialog box appears.
Click the “Browse” button, and navigate to find Project_A and double-click on it. The project path and file name will then appear on the merge text block.
Click on the “Merge” buttom If merge is successful, a “Merge process was successful..” window will appear similar to the one below.
At this point, all the “Project_A” information is now in “Project_C”.
Repeat step 2 to step 5 for “Project_B” If merge is successful, a “Merge process was successful..” window will appear similar to the one below.
At this point, all the “Project_B” information is now in “Project_C” as well.
In “Project_C”, if you click on the Document>One-line.. command, you will see a list of the one-line drawings from “Project_A” and Project_B”.
In “Project_C”, if you click on the Document>TCC.. command, you will see a list of the TCC drawings from “Project_A” and Project_B”.
In “Project_C”, if you click on the Document>Component Editor.. command, you will see a list of the components from “Project_A” and Project_B”.
In Details:
Let’s says there are two PTW32 projects, (Project_A and Project_B), that we want to merge together into another project (Project_C).
At this point, all the “Project_A” information is now in “Project_C”.
At this point, all the “Project_B” information is now in “Project_C” as well.
In “Project_C”, if you click on the Document>One-line.. command, you will see a list of the one-line drawings from “Project_A” and Project_B”.
In “Project_C”, if you click on the Document>TCC.. command, you will see a list of the TCC drawings from “Project_A” and Project_B”.
In “Project_C”, if you click on the Document>Component Editor.. command, you will see a list of the components from “Project_A” and Project_B”.