- General Support
- Oneline & User Interface
- License Key Issues
- Downloading/Installing Software
- Printing
- Reports
- Equipment Modeling
- DAPPER (Demand Load)
- DAPPER (Load Flow)
- DAPPER (Short Circuit)
- CAPTOR (TCC)
- Arc Flash Evaluation
- Equipment Evaluation
- Cable Ampacity
- A_Fault (ANSI)
- IEC 60909 Fault
- IEC 61363 Fault
- TMS (Transient Motor Starting)
- HI_WAVE (Harmonics)
- Unbalanced/Single Phase
- DC Systems Analysis
- GroundMat
- Cable-3D
- Scenario Manager
- Backup & Import/Export
Configuring and Reviewing Software Usage/Logging for Network License
When using Driverless HASP keys, there is a reporting feature available that provides usage details
from users logging into the network license.
Driverless HASP keys can be identified by this image:
On the server where the network key is installed, go to http://localhost:1947. Click on Configuration
on the left-hand side. Check the boxes to enable “Write an Access Log File”, “Include Local
Requests”, “Include Remote Requests”.
*If this page cannot be accessed, download and install HASPUserSetup.exe from the download page
at skm.com
Log files are stored in C:\Program Files (x86)\Common Files\Aladdin Shared\HASP\log
Program Feature List referenced in the log file:
from users logging into the network license.
Driverless HASP keys can be identified by this image:
On the server where the network key is installed, go to http://localhost:1947. Click on Configuration
on the left-hand side. Check the boxes to enable “Write an Access Log File”, “Include Local
Requests”, “Include Remote Requests”.
*If this page cannot be accessed, download and install HASPUserSetup.exe from the download page
at skm.com
Log files are stored in C:\Program Files (x86)\Common Files\Aladdin Shared\HASP\log
Program Feature List referenced in the log file:
Get help for this page
Jitbit HelpDesk