- General Support
- Oneline & User Interface
- License Key Issues
- Downloading/Installing Software
- Printing
- Reports
- Equipment Modeling
- DAPPER (Demand Load)
- DAPPER (Load Flow)
- DAPPER (Short Circuit)
- CAPTOR (TCC)
- Arc Flash Evaluation
- Equipment Evaluation
- Cable Ampacity
- A_Fault (ANSI)
- IEC 60909 Fault
- IEC 61363 Fault
- TMS (Transient Motor Starting)
- HI_WAVE (Harmonics)
- Unbalanced/Single Phase
- DC Systems Analysis
- GroundMat
- Cable-3D
- Scenario Manager
- Backup & Import/Export
Instructions on how to update your new network FlexLM license file on the server
Instructions on how to update your new network FlexLM license file on the server
1. Run LMTOOLS.exe as administrator and go to the “Start/Stop/Reread” tab. Click on the “Stop Server” button:

2. Go to the “Config Services” tab. Look at the “Path to the license file” field.

3.Go to that license file path and overwrite the existing ptw32x.lic with the new one.
4.Go back to the “Start/Stop/Reread” tab. Click on the “Start Server” button:
5.Update all workstations with the new ptw32x.lic file, overwriting the existing file in \PTW32\bin
1. Run LMTOOLS.exe as administrator and go to the “Start/Stop/Reread” tab. Click on the “Stop Server” button:
2. Go to the “Config Services” tab. Look at the “Path to the license file” field.
3.Go to that license file path and overwrite the existing ptw32x.lic with the new one.
4.Go back to the “Start/Stop/Reread” tab. Click on the “Start Server” button:
5.Update all workstations with the new ptw32x.lic file, overwriting the existing file in \PTW32\bin
Files | ||
---|---|---|
![]() |
Instructions on how to update your new network FlexLM license file on the server.pdf 238.6 KB |