- General Support
- Oneline & User Interface
- License Key Issues
- Downloading/Installing Software
- Printing
- Reports
- Equipment Modeling
- DAPPER (Demand Load)
- DAPPER (Load Flow)
- DAPPER (Short Circuit)
- CAPTOR (TCC)
- Arc Flash Evaluation
- Equipment Evaluation
- Cable Ampacity
- A_Fault (ANSI)
- IEC 60909 Fault
- IEC 61363 Fault
- TMS (Transient Motor Starting)
- HI_WAVE (Harmonics)
- Unbalanced/Single Phase
- DC Systems Analysis
- GroundMat
- Cable-3D
- Scenario Manager
- Backup & Import/Export
Worst case arc flash scenario name on report
Is there a way to show the worst case scenario's name in the arc flash evaluation report table?
Answer:
The Arc flash Evaluation report table will show a (*S) note.

If you go towards the bottom of the report, you will see what each (*S) note means.

Answer:
The Arc flash Evaluation report table will show a (*S) note.
If you go towards the bottom of the report, you will see what each (*S) note means.