- General Support
- Oneline & User Interface
- License Key Issues
- Downloading/Installing Software
- Printing
- Reports
- Equipment Modeling
- DAPPER (Demand Load)
- DAPPER (Load Flow)
- DAPPER (Short Circuit)
- CAPTOR (TCC)
- Arc Flash Evaluation
- Equipment Evaluation
- Cable Ampacity
- A_Fault (ANSI)
- IEC 60909 Fault
- IEC 61363 Fault
- TMS (Transient Motor Starting)
- HI_WAVE (Harmonics)
- Unbalanced/Single Phase
- DC Systems Analysis
- GroundMat
- Cable-3D
- Scenario Manager
- Backup & Import/Export
Universal Local Host IP address (127.0.0.1)
127.0.0.1 is the loopback Internet protocol (IP) address also referred to as the “localhost.” The address is used to establish an IP connection to the same machine or computer being used by the end-user.
You can use this IP address as long as the dongle key is connected to your computer.
Location: (C:) > PTW32 > Bin > Nethasp.ini


Please use the following link below for more information
Credit: http://www.tech-faq.com/127-0-0-1.html
You can use this IP address as long as the dongle key is connected to your computer.
Location: (C:) > PTW32 > Bin > Nethasp.ini
Please use the following link below for more information
Credit: http://www.tech-faq.com/127-0-0-1.html