- General Support
- Oneline & User Interface
- License Key Issues
- Downloading/Installing Software
- Printing
- Reports
- Equipment Modeling
- DAPPER (Demand Load)
- DAPPER (Load Flow)
- DAPPER (Short Circuit)
- CAPTOR (TCC)
- Arc Flash Evaluation
- Equipment Evaluation
- Cable Ampacity
- A_Fault (ANSI)
- IEC 60909 Fault
- IEC 61363 Fault
- TMS (Transient Motor Starting)
- HI_WAVE (Harmonics)
- Unbalanced/Single Phase
- DC Systems Analysis
- GroundMat
- Cable-3D
- Scenario Manager
- Backup & Import/Export
How to transfer Arc Flash custom Labels
Question: How can I send a custom arc flash label I developed to another person?
Answer:
a) The custom labels are stored in a file named customlabel.dat located in C:\PTW32\Lib. Attach this file and give it to another person.
b) On that side, the receiver can use the following method below to import the file.
To import the label, you can copy that file to the machine( you can paste it on the desktop). On the Arc Flash Table, select Custom Labels>Designer>Styles…>Import. There you can select the copied file and import the label.
Answer:
a) The custom labels are stored in a file named customlabel.dat located in C:\PTW32\Lib. Attach this file and give it to another person.
b) On that side, the receiver can use the following method below to import the file.
To import the label, you can copy that file to the machine( you can paste it on the desktop). On the Arc Flash Table, select Custom Labels>Designer>Styles…>Import. There you can select the copied file and import the label.