SKM with Brady Printers Targus T300 (Printing Instruction)

Step-by-step:

1) The first step is to locate the Brady T300 Printer in the windows print folder. Click Star, Settings, Printers and Faxes.



2) Right Click on the Bradyprinter T300, and select Printing Preferences.



3) From the Options tab in blue, check the send with job button under Print Head Temperature and drag the arrow to set the temperature to 22. Click OK and open your project in SKM now.



4) Click on the Run and select Arc Flash Evaluation



5) Once this screen appears, click on the custom label tab.



6) Drop down the style field, and select the Brady style of label being printed. If you are unsure of the Brady part number, look on the outside of the bag they came in or on the inner diameter of the roll itself.



7) From this screen select what is to be printed, and click continue



8) From this screen, drop down the arrow and select the Bradyprinter T300, Next, click the Properties button.



9) From the page set up tab, select a label stock size that matches the size being printed. See chart below for reference:

THTEL-184-483-1-WA/DA Use 3.00 X 3.00
THTEL-161-483-1-WA/DA Use 4.00 X 4.00
THTEL-25-483-1-WA/DA Use 4.00 X 6.00



10) Click the radio button next to Landscape 180. Click OK.




11) you are now ready to print.